Rainy Day

Geregistreerd op: 04 Apr 2023 Berichten: 10

machining 7075 aluminum
Machining 7075 aluminum can be a bit more challenging compared to machining other aluminum alloys due to its high strength and hardness. However, with the right tools, techniques, and considerations, you can achieve accurate and precise results. 7075 aluminum is often used in aerospace, automotive, and other high-performance applications where strength and durability are crucial. Here are some tips for machining 7075 aluminum:

1. Tool Selection:

Use carbide or high-speed steel (HSS) tools with sharp cutting edges to withstand the hardness of 7075 aluminum.
Choose coated or uncoated tools based on the cutting speed and feed rates you'll be using. Coated tools can help with tool life and chip evacuation.
2. Cutting Speeds and Feeds:

Start with conservative cutting speeds and feeds, and then gradually increase them while monitoring the tool wear and surface finish.
Higher cutting speeds can help reduce built-up edge (BUE) and improve chip evacuation.
3. Coolant:

Use coolant or lubricant to dissipate heat and prolong tool life. This is especially important when machining at higher speeds.
Flood coolant or mist coolant systems can be effective in preventing overheating.
4. Rigidity and Stability:

5. Tool Geometry:

Use tools with appropriate geometries for aluminum machining, such as high helix angles and sharp edges.
Consider using tools with variable helix or variable pitch to reduce chatter.
6. Chip Evacuation:

Proper chip evacuation is important to prevent chip buildup and potential damage to the workpiece or tool.
Use chip breakers and peck drilling techniques to improve chip evacuation, especially in deep drilling operations.

Ensure that the machining setup is rigid and stable to minimize vibrations, which can lead to poor surface finish and tool wear.
Use proper fixturing and support to avoid workpiece deflection.

cnc machining parts manufacturer
CNC machining aerospace parts